Our car frame has the following advantages:
1. The kit only has ultrasonic obstacle avoidance sensors, which can realize ultrasonic obstacle avoidance, basic learning kit
2. Customers can DIY enrich other functions (need to purchase other arduino series sensors), such as tracking, infrared remote control, Bluetooth control, etc.
Dingpan has uploaded assembly materials, sample programs
Car chassis *1
Car Wheels *2
DC Gear Motor 1 48: a deceleration DC motor
20 line gun code disk *2
Fasteners (high intensity black acrylic) *4
Six battery box *1
Quality Rocker Switch *1
Assembly drawing *1
Several screw nut
V5 shield *1
UNO R3 *1
Principle of operation:
LM393 compares the value of the two photoresistors at any time. When there is an imbalance (for example, one side presses the black track), the motor stops immediately at one side and the motor rotates at the other side, so that the carriage corrects the direction and returns to the correct direction. Above, the whole process is a closed-loop control, so it can be quickly and sensitively controlled.
On the back of the assembly instructions is an easy runway for the tracking car.
Customers can also use the 1.5~2.0 cm black electrical tape directly on the ground to design the complex runway.
Note: the item is not include batteries.
Voltage Comparator LM393 (1)
IC Socket 8-pin (1)
Electrolytic Capacitor 100uF (2)
Adjustable Resistor 10K (2)
Color Ring Resistor 3.3K ohm (2)
Color Ring Resistor 51 ohm (4)
Color Ring Resistor 1K ohm (2)
Color Ring Resistor 10 ohm (2)
Photoresistor CDS5 (2)
LED 3mm (2)
LED 5mm (2)
Triode 8550 (2)
Reduction Motor JD3-100 (2)
Car Wheel Piece (6)
Silica Gel 25*2.5mm (2)
Car Wheel Screw M3x10mm (4)
Car Wheel Screw Nut M3 (4)
Hub Screw M2.2*7mm (2)
Universal Wheel Screw M5x30mm (1)
Universal Wheel Screw Nut M5 (1)
Universal Wheel M5 (1)
PCB D2-1 (1)
Connection Wire Red (1)
Connection Wire Black (1)
Battery Case AAx2 (1)
our car frame has the following advantages:
1 mechanical structure is simple and very easy to install.
2 car comes with tachometer wires 20 meters, with gun shop photoelectric systems can be quickly formed a gun. It can speed, distance, composed of closed circuit systems.
3 with four cars on the battery compartment, convenient for the whole power system. at the same time provided with a switch, easy start-stop. without further very convenient, so that the entire system is highly integrated
4 auto shop with L298N driver module, four monitoring modules, as well as 51 control unit seamless, simple and good-looking components of the system!
1.Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid.
2.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
the car chassis x 1
Car wheels x 2
DC gear motor 2 48: a DC motor deceleration (otherwise 120: 1 Optional)
20 line of code disc Gun x 2
fasteners (high intensity black acrylic) x4
caster x 1
four battery box x 1
A quality Rocker Switch x 1
assembly drawing x 1
V5 shield x 1
UNO R3 x 1
SG90 x 1
FPV x 1
L298N x 1
various screw nut
Δ.Cool while seeing some robot car wandering around? It is very easy. With a car platform, add some micro-controller (such as Arduino) and sensor modules, and program it. Then you made your own robot car.
Δ.Click here view the Demo
Δ.Mechanical structure is simple, very easy to install .
Δ.The car comes with tachometer encoder
Δ.Uses four deceleration direct current machine curve to be nimble, the directivity is good. Four actuations, horsepower fullness. The chassis big and steady very easy to expand
2 x Car chassis
4 x Gear Motor (1:48)
4x Speed encoder
1 x Power button
Cool while seeing some robot car wandering around? It is very easy. With a car platform, add some micro-controller (such as Arduino) and sensor modules, and program it. Then you made your own robot car.
Δ.Click here view the Demo
Mechanical structure is simple, it is easy to install.
This car is the tachometer encoder
Four on the 5th battery compartment, convenient power throughout the system in a switch, while starting and stopping. No add-ins is very convenient, the entire system highly integrated
Can be used to measure distance, speed
Δ.Note: motor power supply is 3V~6V. All the parameter above is tested without load
100% Brand New
1 x Car chassis
2 x Gear Motor (1:48)
2 x Speed encoder4xFasteners
1 x Universal wheel
1 x Power button
1 x Battery Box
We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it’s 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.